Remarques d'utilisation pour la machine de nettoyage à ultrasons à rainure unique

To prolong the service life, it is recommended to put the device in a ventilated and dry area, and the fan hole at the rear of the generator should be cleaned regularly. The generator has air vents on all sides to make the air flow unimpeded.  

1. The cleaning tank must be put into liquid before it can start working. The water level is > 100mm (bottom vibration type) and placed horizontally. 

2. When cleaning the cylinder at normal temperature, do not directly inject high temperature liquid into the cylinder, so as not to cause the loosening of the transducer and affect the normal use of the machine. 

3. When the cleaning liquid needs to be replaced due to pollution, do not inject low-temperature liquid directly into the high-temperature cylinder, which can also lead to the transducer falling off. At the same time, the heater switch should be turned off, so as not to damage the heater because there is no liquid in the tank. 

4. vérifier régulièrement le transducteur, ne pas l'humidifier ni le heurter, afin de ne pas causer de pertes inutiles. Coupez l'alimentation principale après utilisation. Ne redémarrez pas immédiatement après l'arrêt, l'intervalle de temps doit être supérieur à 1 minute.